Meters & DISKS
Precision corn meter
$ 240
Brush Meter W/ Choice of Disk
$200
PRECISION PUMPKIN METER
$320
Precision Sunflower meter
$320
Soybean Disk
$25
Milo Disk
$25
ROW Markers
HyDRAULIC Markers
$1,750
Sold in sets of 6 only
$200 plus $25 shipping in the US
SIX HITCH BRACKETS,
plasma cut from 1/2” steel
If you would like to purchase, send me an email at ksfarms@bluevalley.net. I will reply to email with payment request and can pay by card or Paypal.
CLeaners & Coulters
No-till coulters (new)
$350
No-till coulters (Used)
$150
Row Cleaner Standard Teeth (used)
$150
Row Cleaner Shark-toothed (used)
$200
yetter floating Row Cleaner (new)
$720 new
$250 used
Fertilizer
NOTILL COULTERS (USED)
$150
NOTILL COULTERS (NEW)
$350
LIQUID Fertilizer System
$2,500
DRY FERTILIZER SYSTEM (2 ROW)
$2,500
DRIVES
Direct Drive $1200
Introducing the Direct Drive system from Ksfarms, a streamlined and efficient solution for your planting needs. This system features two fixed wheels that directly drive the planter shaft, offering a direct and robust connection for reliable operation.
The Direct Drive system comes equipped with sprockets for three different seed populations, providing versatility and adaptability to various planting requirements. If you have specific needs, additional sprockets can be added to further customize the system to your unique planting operations.
DriveMission $1,400
Changing sprockets is effortlessly simple and tool-free. Adjust the chain tension by hand and easily slide in the appropriate sprocket. To assist in choosing the right sprocket for various seed populations, a detailed population chart is included.
The drive wheel is designed for minimal space consumption on the tool bar. It is easily bolted onto the bar and can be adjusted to different positions as desired. The row units can be adapted to either narrower or wider spacings, offering versatile planting options. This is a significant improvement over previous models that relied on the larger, more cumbersome factory JD wheel, which was unnecessarily bulky for smaller planters. Our new system also removes the need for the counter shaft and bearings that were essential in older models. Plus, the wheel is equipped with spring down pressure, ensuring it adapts seamlessly to the contours of the ground.
C-DRivemission $1,800
One of the standout advantages of the C-Drive is its allowance for a center row unit placement, an option not possible with the original Drivemission. This feature enhances the planter's versatility and functionality. Choosing to upgrade to the C-Drive from our standard Drivemission system adds an additional $400. Alternatively, the C-Drive is available as a standalone product for $1800.
Miscellaneous
HD SPRINGS
$150
Bracket/gear kit for the planter builder DIY
$399
XP ROW UNIT REBUILD
$500
SEED Box W/ LID
$150
Small planter gear bracket kit- This kit is for the guy that wants to simplify his planter building project. Using the factory JD drive tire, counter shaft, and row units, this kit connects the power from counter shaft to row unit drive shaft. We include 5 sprockets that give you a combination of 6 planter population rates from 20,000 to 30,000 for corn and 100k to 150k for soybeans. Seed rate chart included. Bracket is held on by 7" ubolt. No welding required. Install in minutes. Made for John Deere 7000/7100 or 7200/7300 planter build projects. Specify model at time of order. Sprocket and bearing bores are not the same on both models. We build a kit for each model. Watch our youtube video. Visit our website by googling Ksfarms plot planters. $26 freight to anywhere in the US. If you would like to order, message me your email and shipping address. I will email you a payment request and you can then use your card.
VACUUM SYSTEM
$2500
BARS
MADE FROM 7” SQUARE TUBING
1-2 Row bar (40”-47”)
$1200
2 Row bar (48” to 70”)
$1300
3 Row bar (71” to 100”)
$1400
4 Row bar (101” to 120”)
$1500
4 bar wide or larger planters(121” and longer)
$call
BUILD YOUR OWN PLANTER
bolt-on hitch brackets
$325
Three bolt-on hitch brackets with 7" ubolts. Brackets fit 7" square bar. Brackets can be spaced to fit cat 1 and 2 quick hitches. 7/8" holes for pins. Designed so that the same bracket works on top and bottom. If you wish to order, send email address and shipping address. We will then send payment request by email and you can pay by card. $30 flat rate shipping to anywhere in the US.
weld-on SIX HITCH BRACKETS
plasma cut from 1/2” steel
Sold in sets of 6 only
$200 plus $25 shipping in the US
If you would like to purchase, send me an email at ksfarms@bluevalley.net. I will reply to email with payment request and can pay by card or Paypal.
bolt-on Bracket/gear kit for the planter builder DIY
$399
Small planter gear bracket kit- This kit is for the guy that wants to simplify his planter building project. Using the factory JD drive tire, counter shaft, and row units, this kit connects the power from counter shaft to row unit drive shaft. We include 5 sprockets that give you a combination of 6 planter population rates from 20,000 to 30,000 for corn and 100k to 150k for soybeans. Seed rate chart included. Bracket is held on by 7" ubolt. No welding required. Install in minutes. Made for John Deere 7000/7100 or 7200/7300 planter build projects. Specify model at time of order. Sprocket and bearing bores are not the same on both models. We build a kit for each model. Watch our youtube video. $26 freight to anywhere in the US. If you would like to order, message me your email and shipping address. I will email you a payment request and you can then use your card.
weld-on drive bracket
$50
Weld-on bracket for planter drives. Accommodates 2 bolt flange bearing, hole for chain tightner, and hole for planter drive shaft. $50 plus $15 shipping. If you wish to order, send me your email with address and I will send payment request and you can then pay by card.